As someone who has recently entered the insulating glass manufacturing industry, everything related to the production, processing, and manufacturing of insulating glass is new and starting anew. It can be said very exaggeratedly that before this, even the basic steps for making insulating glass were unclear, and it was not clear which machines, equipment, and raw materials must be used. It can be said that choosing to enter this industry at that time was very blindly following the trend, just looking at this industry for profit!

After entering this manufacturing industry, I found that the steps of making insulating glass are very complicated and the precision requirements for important links are also very high. If there are difficulties in precision at a certain stage, it will harm the next natural environment. In addition, many workers are required to actually operate the important links, and this kind of work is full of complex work with repeated aspect ratios. Among them, the second step of sealing and gluing the insulating glass after making the insulating glass is not only very labor-intensive but also very time-consuming.

Therefore, after mastering it, the author discovered the insulating glass gluing machine, which can replace manual service to carry out secondary sealing of insulating glass and produce finished products with higher practical effects than manual service.

After mastering the insulating glass gluing machine, I found that it can be divided into two types. One is the column type insulating glass gluing machine, which is relatively expensive and not suitable for small and medium-sized enterprises. Therefore, I immediately abandoned it. The horizontal insulating glass gluing machine investigated not only has exquisite equipment, but also produces high-quality and cost-effective insulating glass with exquisite appearance, which can be said to have high cost-effectiveness and is thoroughly prepared in advance for small and medium-sized enterprises like companies. By the way, when purchasing a glue machine, I considered a company in Shandong Province and a company in Tangshan City. After checking the information of these two companies online, I found that the company in Tangshan City is a product research and development company for horizontal insulated glass glue machines. Then, I checked the website of the Trademark Office and came across the company's invention patent certificate for insulated glass glue machines. Therefore, I chose a machine equipment from Tangshan City, which is called Tangshan Chenglin CNC Machine Tool Machinery Equipment Factory. It is necessary to pay attention to this.

As a user of a horizontal insulating glass gluing machine, I would like to provide a detailed introduction to the application experience of the insulating glass gluing machine. As someone else who is preparing to purchase an insulating glass gluing machine, please point out the road conditions.

The speed of the horizontal insulating glass gluing machine

According to the application of the horizontal insulating glass gluing machine by the author, the gluing rate is approximately around 1 square meter per minute, which includes the speed of the upper and lower sheets of laminated glass. If a skilled worker is responsible for the left and right sheets of laminated glass, the speed can be reduced by about half. Here is an indication that the manufacturer of the horizontal insulating glass gluing machine will present two mobile carts for placing laminated glass. People will put the laminated glass on the carts and the staff will rotate the carts to carry out the actual operation of the gluing machine on the four sides of the insulating glass. The author's company hired a professional employee to handle the actual operation of the upper and lower layers of laminated glass, and another professional employee to carry out adhesive application.

Regarding product quality

In my opinion, the quality of the insulated glass produced by the horizontal insulated glass gluing machine is quite good~~After seeing the products produced by Penyou using the end gun gluing machine in the past, it is even more satisfying. After completing the sealing operation with the end gun type glass gluing machine used by relatives, it is necessary to repair the four corners, while the hollow glass foundation produced by the horizontal hollow glass gluing machine does not require edge pressing on the four corners. If you find that there is too much colloidal solution on the four corners or edges, it can exert a clamping force on the glue machine, such as adjusting the working pressure or the glue application rate, until it is adjusted to a very good condition. Based on my work experience, there is no need to make frequent adjustments unless there is a significant difference in the depth of the aluminum plates that people adhere to. In addition, people usually do not need to adjust their work pressure.

Regarding equipment maintenance

The maintenance of this machine equipment is a very satisfactory area for me. It is very time-saving and labor-saving, and there is no need for the manufacturer to send someone back to solve the problem, saving time waiting for experienced personnel from the manufacturer. The basic equipment of this machine is that there are very few areas where iron rashes are easily damaged, and the spare parts include many power switches, various instrument panels, and electronic components such as gate valves. Once problems arise in these areas, the instrument panel of the machine will remind which part of the electronic components have been damaged. Then people can replace them independently, and the replacement is also very simple! If the common faults are more certified, the only way is for the manufacturer to send someone to fix them.